English 
German 
Spanish 
Turkish 
French 
Arabic 
Portuguese 
Korean 
Italian 
X3530E-C1 Automation Solution
A professional CNC lathe manufacturer is always prepared oneself well with solutions for clients !
With permission from clients’, we are sharing you our full experience in bringing productivity processing to our clients .
Please feel free to send your parts drawings and requirements, our team can make processing and automation schemes for you.
Share:
● Purchased type of equipment：X3530E-C1
（1）Lathe：Precision linear guide-way CNC lathe with slant bed X3530E
（2）Feed system: Servo robot hand+single layer pallet device
● Diagram:
（1）Precision linear guide-way CNC lathe with slant bed X3530E-C1 diagram:
（2）Machine diagram：
- 1. Precision gear wheel/rack(slant gear）
- 2. Linear guide
- 3. Robot hand claw (in and out)
- 4. Hydraulic rotary cylinder
- 5. 1: Precision spring chuck; 2: Precision hydraulic chuck
- 6. Tools
- 7. Hydraulic pressure station
- 8. Bed & head all integrated die-casting to strongly enhance the rigidity
- 9. Single layer pallet
（3）Robot hand claws sketch：
（Robot hand claws sketch）
- 1. Raw parts
- 2. Loading spring
- 3. Adjustable backer
- 4. Rotary cylinder
- 5. Damping
- 6. Customized claw
- 7. Loading cylinder
- 8. Unloading cylinder
- 9. Customized claw
- 10. Finished
（4）Stock tray sketch：
（stock tray sketch）
- 1. Finished
- 2. Raw parts
Note: The robot hand claw and code tray are customized according to customer’s products
● Technical specification、configuration list：
1. X3530E Technical specification、configuration list：
| Main parameter | Unit | Parameter value |
| Max. swing diameter (over bed) | mm | 400 |
| Max. Turning diameter | mm | 320 |
| Max. Turning length | mm | 300 |
| Spindle to toolholder plate center height | mm | 50 |
| Spindle center to ground height | mm | ≈1050 |
| X axis travel (Max.) | mm | 350 |
| Z axis travel (Max.) | mm | 300 |
| X axial motor power/torque | Kw/N | 6 |
| Z axial motor power/torque | Kw/N | 6 |
| Spindle nose size | N/A | A2-5 |
| Hydraulic chuck specifications | collet | 45 |
| Power Chuck Specifications (optional) | inch | 6 |
| Spindle bore diameter | mm | 48 |
| Max. bar through hole diameter | mm | 35/25 |
| Spindle power (motor spindle) | Kw | 8.5 |
| Spindle rated speed/Max.speed | r/min | 2000/4500 |
| Spindle rated torque/Max.torque | N | 22/84 |
| X/Z axial rapid traverse (GO) | m/min | 20 |
| Number of tools. | pc | 5 |
| Tool shank size | mm | 20 |
| Boring toolholder ID | mm | ￠20 |
| X/Z axis repeating positioning accuracy | mm | 0.003 |
| Water coolant capacity | L | ≈84 |
| Hydraulic oil lubrication capacity | L | 40 |
| Machine full load power | KW | 12 |
| Dimension (LxWxH) | mm | 1800*1450*1700 (not including robot hand) |
| Total machine weight | Kg | ≈1800（not including robot hand） |
2.X3530E Main machine component list：
| No. | Item | COMPONENT BRAND & SPEC. | ORIGINAL COUNTERY | Qty |
| 1 | CNC machine system | Syntec 7TA | Taiwan China | 1 |
| 2 | Servo motor/drive | SYNTEC three in one | Taiwan China | 2 |
| 3 | Spindle motor | Asynchronous electric spindle | China | 1 |
| 4 | Ball screw | PMI/3210 | Taiwan | 2 |
| 5 | X/Z linear guide | PMI 25/30 | Taiwan | 4 |
| 6 | Spindle bearing | （P4） | China | 5 |
| 7 | Spindle structure | Independent spindle with front three bearings and two after | GONGTIE R&D | 1 |
| 8 | Ball screw supporting bearing | Double supporting with pre-stretching | GONGTIE R&D | 1 |
| 9 | Hollow hydraulic rotary cylinder | Jiajian 536 | China | 1 |
| 10 | Hydraulic system | SEVEN OCEAN | Taiwan | 1 |
| 11 | Electric cabinet with heat exchanger | Xinfu No.5 | China | 1 |
| 12 | Low voltage electrics | Delixi | China | 1 |
| 13 | Fixture | 45 precision spring chuck(customized) | GONGTIE R&D | 1 |
| 14 | Water pump | Luikar（15M lifting） | China | 1 |
| 2. ADD FACILITY： | ||||
| 1 | Chip conveyor | Backside | China | 1 |
| 2 | High pressure water pump | 45M lifting | China | 1 |
3.Automation device：Palletizing servo robot hand
| No. | Kit | Brand&original country | QTY |
| Mechanical core component | |||
| 1 | Beam kit | GONGTIE | 1 set |
| 2 | Beam linear guide-way | Taiwan PMI | 1set |
| 3 | Gas claw | Japan SMC | 1set |
| 4 | Rotary cylinder | Japan SMC | 1set |
| 5 | Cylinder | Japan SMC | 1set |
| 6 | Sensor | Japan SMC | 1set |
| 7 | Gear wheel/rack(slant gear） | Germany Henryan | 1set |
| 8 | Work-stocker system(in tray/pallet) (12-station ) | GONGTIE | 1set |
| 9 | Loading and unloading device (robot hand claws) | GONGTIE | 1set |
| Electrical system core component | |||
| 1 | Electric component | FRANCH SCHNEIDER | 1set |
| 2 | Servo motors/systems | SYNTEC ALL IN ONE | 1set |
| 3 | CNC system | SYNTEC ALL IN ONE | 1set |
| 4 | Reduction gear | TAIWAN | 1set |
| 5 | Man-machine interface | SYNTEC ALL IN ONE | 1set |
After-Sales Service
- After the equipment is installed in place, debug it in time.
- Reply within 12 hours according to the customer's telephone and email questions.
- During the warranty period (one year), the maintenance caused by non-human shall be borne by our company; After insurance, spare parts and repair are provided with a fee charged.
Contact Gongtie To Get Your Competitive Advantage
- Get A Quote
- Request For Catalog
- Ask For Machine Details
- Get Worry-free Solution
Contact Gongtie To Get Your Competitive Advantage
- Get A Quote
- Request For Catalog
- Ask For Machine Details
- Get Worry-free Solution